Jstone Fiberglass Surface Tissue for Molding, Winding, Piping
Fiberglass surface mat is mainly used for the surface layer of fiberglass products. Divided into specific wound type JS-ST (w) series, hand lay-type JS-ST (H) series and pultrusion type JS-ST(P) series of three categories.
A Full Range of Molding Solution
From the manufacturer
Product Description
Fiberglass surface mat is mainly used for the surface layer of fiberglass products. Divided into specific wound type JS-ST (w) series, hand lay-type JS-ST (H) series and pultrusion type JS-ST(P) series of three categories.
-
Excellent fiber distribution
-
Smooth surface appearance of finished products
-
Corrosion resistant
-
Low binder content
-
Good molding properties
Technical Details
| Product No. | Gum Content (%) | Area Weight (g/m²) | Roll Width (mm) | Tensile Strength (Longitudinal) | Moisture Content (%) |
|---|---|---|---|---|---|
| JS-ST(W)-30 | 7 | 30 | Typical: 1,000 Range: 50 ~ 3,000 | ≥30 | ≤0.5 |
| JS-ST(W)-50 | 7 | 50 | Typical: 1,000 Range: 50 ~ 3,000 | ≥50 | ≤0.5 |
| JS-ST(H)-30 | 6 | 30 | Typical: 1,000 Range: 50 ~ 3,000 | ≥25 | ≤0.5 |
| JS-ST(H)-50 | 6 | 50 | Typical: 1,000 Range: 50 ~ 3,000 | ≥40 | ≤0.5 |
| JS-ST(P)-90 | 8 | 90 | Typical: 1,000 Range: 50 ~ 3,000 | ≥200 | ≤0.5 |
| Color | White, Yellow |
|---|---|
| Specs | 1 pcs (1.97"×150feet), 1 pcs (6"×82feet), 12 pcs (1.97"×150feet), 6 pcs (1.97"×150feet), 1 pcs (7/8"x500feet), 1 pcs (7/8" x 300feet) |
Be the first to review “Jstone Fiberglass Surface Tissue for Molding, Winding, Piping”
Reviews
There are no reviews yet.